Weight: 10 Kg/bộ
CÔNG TY C.P CÔNG NGHIỆP NHẤT VIỆT là đơn vị phân phối chính thức và duy nhất của dòng sản phẩm này
Epokrete is a multipurpose, two components, gloss epoxy coating with glass flake additive is suitable for use in moderate to severe environments. It can also be used on clean steel, metal, concrete floor, wall and previously coated surfaces.
Epokrete is self priming.
Easy application, fast dry and suitable for self-maintenance
Suitable for both concrete and clean steel
Excellent abrasion resistance
Resist to many common chemicals
Self priming – primer is not required
Mã màu sơn
- Compressive Strength (JIS K7208)> 40 MPa
- Bond strength (JIS K5600) > 2 MPa
- Abrasion resistance (JIS K5600)< 50 mg
- Number of coats 2 - 3 coats
- Coverage0.1-0.2 kg/m2/coat
area of application
Stir each component separately by using a slow speed electric drill fitted with a paint mixer or a wing type mixing paddle and continue to mix for 2-3 minutes and until homogeneous before use.
Thinning: can be thinned 5% to 10%
Application method :
1. Apply KRETOP EPOKRETE by airless or conventional spray, squeegee, roller and or brush and within its pot life (45 min at 23oC).
2. When the surface completely dry, apply the next layer
STORAGE AND HANLING
Keep container closed, store in a dry, cool, well-ventilated area and away from heat and fire
Handle with care. Stir well before use.
HEALTH & SAFETY
- May cause irritation when exposed.
- Avoid breathing the mist.
- Avoid skin and eyes contact. Wash the contaminated skin with soap and water in case of skin contact.
- Wear all appropriate Personal Protective Equip-ment (PPE) during application. In case of eyes contact, flush the contaminated eye(s) with water and seek medical attention immediately.
- Obtain medical attention in case of ingestion.